What Is Hardwood Floor Refinishing?
Hardwood floor refinishing sands away the top layer of a worn wood floor and applies fresh stain and finish, restoring its original appearance without the cost of full replacement. It's one of the best-value projects available to Aberdeen, SD homeowners with solid hardwood, since a single floor can typically be refinished multiple times over its lifespan. Refinishing is the right call when a floor looks dull, scratched, or discolored but the wood itself is still structurally sound underneath the worn finish. The process also offers a chance to change the stain color entirely, giving an old floor a completely different look.
Why You Shouldn't Wait
Waiting too long to refinish a hardwood floor lets scratches and wear penetrate past the finish layer and into the wood itself, sometimes requiring deeper, more aggressive sanding to fully remove the damage. Refinishing done with the wrong sanding grit sequence or uneven pressure leaves visible swirl marks or dips that are difficult to correct without starting over. And a floor with unaddressed moisture damage or structural issues underneath will show that damage again shortly after refinishing, since the process addresses the surface, not what's happening below it.
Our Process
Assessment & Prep
We inspect the floor for depth of wear, moisture issues, and how many refinishing cycles the wood has left before recommending the approach.
Sanding
The floor is sanded through a sequence of progressively finer grits to remove the old finish and surface damage evenly across the whole room.
Staining
If a color change or refresh is wanted, stain is applied evenly and given time to penetrate before the finish coat goes on.
Finish Application
Multiple coats of protective finish are applied with light sanding between coats for a smooth, durable, glass-like result.
Curing
The finish is left to cure fully before furniture and normal foot traffic return, which protects the new surface from premature wear.
What to Expect
Refinishing typically takes three to five days including sanding, staining, and multiple finish coats with drying time between each. The room will need to stay clear of foot traffic during the process and for a curing period afterward, which we'll specify based on the finish product used. Dust containment systems keep the mess to a minimum, but some fine dust in adjoining areas is normal.
Why Choose SoftStep Surfaces for Hardwood Floor Refinishing
We use dust-containment sanding equipment that keeps the mess well below what older refinishing methods create.
Our sanding sequence is calibrated to remove damage evenly, avoiding the swirl marks rushed jobs often leave behind.
We offer a range of stain options if you want to refresh or completely change your floor's look.
17 years refinishing hardwood across Aberdeen, SD means we can judge how many cycles a floor has left in it.
Frequently Asked Questions
Solid hardwood can typically be refinished four to six times over its life, depending on the thickness of the wear layer above the tongue and groove. We assess this during our initial inspection.
Most refinishing projects take three to five days from start to finish, including sanding, staining if applicable, and multiple coats of finish with drying time in between.
Yes, refinishing is a great opportunity to change stain color entirely, whether you want to go darker, lighter, or a completely different tone than what's currently there.
It's not strictly required, but many homeowners choose to because of the noise, dust, and fumes from sanding and finishing. We'll walk you through what to expect for your specific timeline.
Light foot traffic in socks is often fine within 24 hours, but we recommend waiting several days before moving furniture back and up to two weeks for area rugs, depending on the finish product used.
Surface scratches are typically fully removed during sanding. Deeper dents may improve significantly but aren't always fully eliminated, depending on how deep they penetrate into the wood.